We believe in our products and stand by them providing a full money back guarantee any time in the first year and a 3 year part replacement guarantee.
Housetron with cut away showing its catalytic core
Scale build up in the home:
- Affects system pressure and reduces flow rates
- Raises energy costs as scale insulates and reduces the efficiency of water heating appliances such as boilers, hot water tank heaters, tankless water heaters, coffee machines, kettles etc.
- Leaves unsightly deposits around baths, showers, sinks and toilets particularly around shower heads and faucets. This often requires tiresome cleaning with de-scaling chemicals.
The problems associated with the use of conventional water softeners:
- Water softeners utilizing salt have a detrimental effect on the environment and drinking water quality
- Initial cost, running costs, size, consumption (water / salt / power)
- The overall inconvenience of maintainance and operation: carrying salt bags, dosing etc.
- Interruptions in water supply during backwashing cycles
Benefits of using the Fluid Dynamics Housetron solution:
The Housetron prevents scale build up and hard water stains when installed on new systems and gradually removes scale from previously untreated older systems ( this process is gradual and it may take up to several months to de-scale a previously untreated system ). The Housetron is a proven water softener alternative.
No detrimental effect on drinking water unlike salt utilizing conventional water softeners
As the Housetron replaces existing water softeners all the running costs and inconveniences associated with the use of conventional water softeners is eliminated. No more salt carrying, water waste and no more damage to the environment.
You can fit and forget the Housetron as the Fluid Dynamics solution is completely maintenance free requiring no chemicals, electricity or salt.
With no backwashing required a continual water supply is assured.
Compatible with any pipework material, the easy installation can be carried out either, by a DIY enthusiast or, a plumber. Installation involves replacing a small section of pipe with the Fluid Dynamics Housetron and typically takes under 30 minutes.
Please note: As we don’t physically add to or remove anything from the water, pH, hardness and other readings will be the same before and after your Housetron unit.
Anthony S: “We have well water and had experienced all sorts of water problems, galvanic corrosion, hardness around 2,000 ppm and very hard calcium deposits on plumbing fittings, pipes and joints. About a week after installing the Housetron we noticed a reduction and softening of the calcium deposits and the reduction in deposit hardness has continued. The existing deposits in our system started to dissolve, good news for the internal workings of the furnace….
We thoroughly recommend the Housetron equipment for situations where scaling is a problem and cannot speak highly enough of the customer service we experienced. Knowledgeable, patient and able to explain the complexities to “a dummy”. Thank you for your help.”
Steve Dold, Dold Plumbing, Wichita: I have a free-standing ice maker and before I installed the Fluid Dynamics unit the ice would stick to the plate after a month. I have well water and the ice would not drop. Since I installed the Fluid Dynamics unit I have not had any more problems.
Dayle and Kenneth G: “We couldn’t be happier with this product. We are now several years in residence and are very satisfied with the results so far”.
Installation and sizing:
This simple example shows a 3/4″ Housetron about to be installed in a previously untreated galvanized steel system. The home owner installed the unit after noticing significant scale build up during the installation of a tankless water heater.
Note: If a fire suppression/sprinkler system is installed on the main inlet to your home, the Housetron should be installed after the branch off to that system.
The Housetron is an in – line treatment unit that can be mounted horizontally or vertically, whichever is the most convenient, on the inlet to your home following the stop valve. If a recirculating hot water line is in use an additional unit should be installed on that line. Many of our customers have installed the Housetron themselves, however, for those that require a plumber the installation does not take long under normal circumstances.
The Housetron is designed to prevent scale throughout your home on both the hot and cold sides of your water system. Installation should be as shown above to receive the full benefit of your Housetron for many years to come. However, if installed to protect a water heater and the hot side of the system only, the Housetron should be installed at least 3 feet before the water heater. Again, as mentioned previously, if a recirculating hot water line is in use then an additional unit should be installed on that line.
Sizing is very important. For one to four people living in a home select the ½” Housetron. For five people and above select the ¾” Housetron.
If you have any questions please give us a call at (844) 966 7225.